Dynamic modeling and adaptive control for space stations

Of all large space structural systems, space stations present a unique challenge and requirement to advanced control technology. Their operations require control system stability over an extremely broad range of parameter changes and high level of disturbances. During shuttle docking the system mass may suddenly increase by more than 100% and during station assembly the mass may vary even more drastically. These coupled with the inherent dynamic model uncertainties associated with large space structural systems require highly sophisticated control systems that can grow as the stations evolve and cope with the uncertainties and time-varying elements to maintain the stability and pointing of the space stations. The aspects of space station operational properties are first examined, including configurations, dynamic models, shuttle docking contact dynamics, solar panel interaction, and load reduction to yield a set of system models and conditions. A model reference adaptive control algorithm along with the inner-loop plant augmentation design for controlling the space stations under severe operational conditions of shuttle docking, excessive model parameter errors, and model truncation are then investigated. The instability problem caused by the zero-frequency rigid body modes and a proposed solution using plant augmentation are addressed. Two sets of sufficient conditions which guarantee the globablly asymptotic stability for the space station systems are obtained

Geometric error analysis for shuttle imaging spectrometer experiment

The demand of more powerful tools for remote sensing and management of earth resources steadily increased over the last decade. With the recent advancement of area array detectors, high resolution multichannel imaging spectrometers can be realistically constructed. The error analysis study for the Shuttle Imaging Spectrometer Experiment system is documented for the purpose of providing information for design, tradeoff, and performance prediction. Error sources including the Shuttle attitude determination and control system, instrument pointing and misalignment, disturbances, ephemeris, Earth rotation, etc., were investigated. Geometric error mapping functions were developed, characterized, and illustrated extensively with tables and charts. Selected ground patterns and the corresponding image distortions were generated for direct visual inspection of how the various error sources affect the appearance of the ground object images

Flexible structure control laboratory development and technology demonstration

An experimental structure is described which was constructed to demonstrate and validate recent emerging technologies in the active control and identification of large flexible space structures. The configuration consists of a large, 20 foot diameter antenna-like flexible structure in the horizontal plane with a gimballed central hub, a flexible feed-boom assembly hanging from the hub, and 12 flexible ribs radiating outward. Fourteen electrodynamic force actuators mounted to the hub and to the individual ribs provide the means to excite the structure and exert control forces. Thirty permanently mounted sensors, including optical encoders and analog induction devices provide measurements of structural response at widely distributed points. An experimental remote optical sensor provides sixteen additional sensing channels. A computer samples the sensors, computes the control updates and sends commands to the actuators in real time, while simultaneously displaying selected outputs on a graphics terminal and saving them in memory. Several control experiments were conducted thus far and are documented. These include implementation of distributed parameter system control, model reference adaptive control, and static shape control. These experiments have demonstrated the successful implementation of state-of-the-art control approaches using actual hardware

Theoretical Study on the Effects of Dislocations in Monolithic III-V Lasers on Silicon

In this work, we present an approach to modelling III-V lasers on silicon based on a travelling-wave rate equation model with sub-micrometer resolution. By allowing spatially resolved inclusion of individual dislocations along the laser cavity, our simulation results offer new insights into the physical mechanisms behind the characteristics of 980 nm In(Ga)As/GaAs quantum well (QW) and 1.3 mu quantum dot (QD) lasers grown on silicon. We identify two effects with particular importance for practical applications from studying the reduction of the local gain in carrier-depleted regions around dislocation locations and the resulting impact on threshold current increase and slope efficiency at high dislocation densities. First, a large minority carrier diffusion length is a key parameter inhibiting laser operation by enabling carrier migration into dislocations over larger areas, and secondly, increased gain in dislocation-free regions compensating for gain dips around dislocations may contribute to gain compression effects observed in directly modulated silicon-based QD lasers. We believe that this work is an important contribution in creating a better understanding of the processes limiting the capabilities of III-V lasers on silicon in order to explore suitable materials and designs for monolithic light sources for silicon photonics.Qualcomm Inc Studentshi

Gain switching of monolithic 1.3 μm InAs/GaAs quantum dot lasers on silicon

© 1983-2012 IEEE. We report the first demonstration of gain-switched optical pulses generated by continuous-wave 1.3 μm InAs/GaAs quantum dot (QD) broad-area lasers directly grown on silicon. The shortest observed pulses have typical durations between 175 and 200 ps with peak output powers of up to 66 mW. By varying the drive current pulsewidth and amplitude systematically, we find that the peak optical power is maximized through sufficiently long high-amplitude drive pulses, whereas shorter drive pulses with high amplitudes yield the narrowest achievable pulses. A three-level rate equation travelling-wave model is used for the simulation of our results in order to gain a first insight into the underlying physics and the laser parameters responsible for the observed behavior. The simulations indicate that a limited gain from the InAs QDs and a very high gain compression factor are the main factors contributing to the increased pulsewidth. As the optical spectra of the tested broad-area QD laser give a clear evidence of multitransverse-mode operation, the laser's dynamic response could be additionally limited by transversal variations of the gain, carrier density, and photon density over the 50 μm wide laser waveguide

Dynamic Properties of Monolithic 1.3 μm InAs/GaAs Quantum Dot Lasers on Silicon

Small-signal experiments with a 2.5 mm-long quantum dot narrow ridge-waveguide laser on silicon show a modulation bandwidth of 1.6 GHz. For the first time, we report key high-speed parameters such as the differential gain and the gain compression factor

Understanding the bandwidth limitations in monolithic 1.3 μm InAs/GaAs quantum dot lasers on silicon

In this paper, we present measurements and simulations of the small-signal modulation response of monolithic continuous-wave 1.3 μm InAs/GaAs quantum dot (QD) narrow ridge-waveguide lasers on a silicon substrate. The 2.5 mm-long lasers investigated demonstrate 3dB modulation bandwidths of 1.6 GHz, D-factors of 0.3 GHz/mA1/2, modulation current efficiencies of 0.4 GHz/mA1/2, and K-factors of 2.4 ns and 3.7 ns. Since the devices under test are not designed for high-speed operation due to their long length and hence long photon lifetime, the modulation response curves are used as a fitting template for numerical simulations with spatiotemporal resolution to gain insight into the underlying laser physics. The obtained parameter set is used to unveil the true potential of the laser material in an optimized device geometry by modeling the small-signal response at different cavity lengths, mirror reflectivities, and for different numbers of QD layers. The simulations predict a maximum 3dB modulation bandwidth of 5 GHz to 7 GHz for a 0.75 mm-long cavity with 99 % and 60 % high-reflection coatings and ten QD layers. Modeling the impact of dislocations on the dynamic performance qualitatively reveals that enhanced non-radiative recombination in the wetting layer leaves the modulation bandwidth of QD lasers on silicon almost unaffected, while dislocation-induced optical loss does not pose a problem, as long as sufficient gain is provided by the QD active region.UK EPSRC Grant, No. EP/J012904/1 & EP/J012815/1 Qualcomm Inc. studentship Royal Academy of Engineering, Reference No. RF201617/16/2

Geochronology, petrogenesis and oxidation state of the Northparkes igneous suite, New South Wales, Australia: implications for magma fertility

New geochronological and geochemical data for the barren and ore-associated suites from the Northparkes porphyry Cu-Au deposits, Australia, have implications for magma fertility. The Goonumbla and Wombin Volcanics and intrusions are barren in the Northparkes area. A sample from Wombin suite yielded a zircon U-Pb age of 433.8 ± 3.1 Ma, whereas the ore-associated porphyries yielded ages between 441.8 ± 3.7 and 436.3 ± 4.5 Ma. The bulk of the mineralization at Northparkes is associated with a K-feldspar-phyric quartz monzonite porphyry (K-QMP), which gave U-Pb zircon ages of 441.8 ± 3.7 and 441.1 ± 2.5 Ma. Whole-rock Sr-Nd isotope compositions of the Goonumbla, Wombin, and ore-associated suites are similar, with (87Sr/86Sr)i = 0.704112 to 0.704424 and εNd = 5.6 to 6.9, which is typical of primitive intraoceanic island arcs, and their Pb isotope values lie within the MORB array. Most of the zircons from the Wombin and ore-associated suites have arc mantle-like O-Hf isotope compositions, with δ18O values that vary from 6.13 to 4.95, and εHf(t) from 11.5 to 6. These results suggest that the Goonumbla, Wombin, and ore-associated suites originated from typical arc mantle. The magmas that produced the Goonumbla and Wombin suites were dominated by plagioclase-pyroxene fractionation, and the Wombin suite has a low oxidation state with ΔFMQ between ~0 and 1.5. They were relatively reduced and dry. This combination resulted in early sulfide saturation, probably without reaching fluid saturation. Trace element modeling shows that plagioclase-amphibole dominated the later stages of fractionation of the ore-associated suite, implying that it had a higher water content than the barren suites. It was also more oxidized (ΔFMQ from ~0 to 4). The result was late sulfide saturation, which was followed shortly thereafter by voluminous fluid release. As a consequence, the ore-forming fluid effectively transferred Cu and Au from the magma to the site of hydrothermal ore deposition. We suggest that the higher water content and oxidation state of the ore-associated suite was due to the deep underlying magma chamber, which was recharged by many more pulses of magma than the chamber that underlay the barren suites. This is more effective in raising the concentration of incompatible water and ferric iron in the residual melt than straight fractional crystallization. High oxygen fugacities and water contents played a significant role in determining the timing of sulfide and fluid saturation, respectively, and as a result, they had a critical influence on magma fertility

A comparative study of hummingbirds and chickens provides mechanistic insight on the histidine containing dipeptide role in skeletal muscle metabolism

Histidine containing dipeptides (HCDs) have numerous ergogenic and therapeutic properties, but their primary role in skeletal muscle remains unclear. Potential functions include pH regulation, protection against reactive oxygen/nitrogen species, or Ca2+ regulation. In recognition of the challenge of isolating physiological processes in-vivo, we employed a comparative physiology approach to investigate the primary mechanism of HCD action in skeletal muscle. We selected two avian species (i.e., hummingbirds and chickens), who represented the extremes of the physiological processes in which HCDs are likely to function. Our findings indicate that HCDs are non-essential to the development of highly oxidative and contractile muscle, given their very low content in hummingbird skeletal tissue. In contrast, their abundance in the glycolytic chicken muscle, indicate that they are important in anaerobic bioenergetics as pH regulators. This evidence provides new insights on the HCD role in skeletal muscle, which could inform widespread interventions, from health to elite performance